RNTA 4-bolt Anchor Base Pole (8'-14') 
Height—8' to 14'; Pole—The pole shaft is extruded from seamless 6000 series alloy aluminum.; Pole Top—A pole top tenon is provided for top mount luminaire and/or bracket. A removable pole cap is available for poles receiving drilling patterns for side-mount luminaire arm assemblies.; Handhole—A covered handhole with hardware and grounding provision are provided.; Base Cover—Optional Dart Square-2T cast and decorative base covers available as special order; Anchor Base—The anchor base is cast from 356 alloy aluminum. The completed assembly is heat-treated to a T6 temper. Aluminum nut covers are included with anchor base unless otherwise specified.; Anchor Bolts—Anchor bolts conform to ASTM F1554 Grade 55 and are provided with two hex nuts and two flat washers. Bolts have an “L” bend on one end and are galvanized a minimum of 12" on the threaded end.; Finish—The standard finish for the pole assembly and components is satin brushed, natural anodize, duranodic or polyester powder applied coating in accordance with Valmont’s Specifications. Additional finish options available upon request.
Spec Sheets
RNTA 8 14 4BOLT ANCHOR BASE SPC7074 0917PJL.PDF
Fixture Details
Features Benefits:
Height8' to 14'; PoleThe pole shaft is extruded from seamless 6000 series alloy aluminum.; Pole TopA pole top tenon is provided for top mount luminaire and/or bracket. A removable pole cap is available for poles receiving drilling patterns for side-mount luminaire arm assemblies.; HandholeA covered handhole with hardware and grounding provision are provided.; Base CoverOptional Dart Square-2T cast and decorative base covers available as special order; Anchor BaseThe anchor base is cast from 356 alloy aluminum. The completed assembly is heat-treated to a T6 temper. Aluminum nut covers are included with anchor base unless otherwise specified.; Anchor BoltsAnchor bolts conform to ASTM F1554 Grade 55 and are provided with two hex nuts and two flat washers. Bolts have an L bend on one end and are galvanized a minimum of 12" on the threaded end.; FinishThe standard finish for the pole assembly and components is satin brushed, natural anodize, duranodic or polyester powder applied coating in accordance with Valmonts Specifications. Additional finish options available upon request.
You must log in to add this fixture to a project!
