DSF20/DSF35 Internal Hinged Pole 
Height—20' to 39'; Pole—The pole shaft conforms to ASTM A595 Grade A or A572 Grade 55 with a constant linear taper of 0.11 in/ft.; Pole Top—Pole is provided with either a tenon top or drilled for a fixture mounting. A removable pole cap is provided for drilled poles. Consult the luminaire manufacturer for correct tenon size or drill pattern. Other pole top options include pole cap only (PC) or plain top (PL) which is typical when the pole top diameter matches the necessary slip fit dimensions.; Hinge—The internal hinge includes a stainless steel pin. A flexible guide is provided for wiring protection through the hinge area.; Shroud—The shroud is fabricated from weldable grade hot rolled commercial quality carbon steel with a minimum yield strength of 45,000 psi. It is a onepiece formed channel which conforms to the pole shaft taper. The shroud is secured by a threaded stud and nut with provisions for a padlock to prevent accidental or unauthorized lowering.; Winch—A removable winch is available for raising and lowering the pole.; Handhole—A reinforced handhole with grounding provision is provided at 1'-6" from the base end of the pole assembly. Each handhole includes a cover and the cover attachment hardware. Poles with a 5.25" or 6.00" base square are supplied with a 3" X 5" rectangular handhole. All other pole assemblies are provided with a 4" X 6.5" ovalized handhole. Handhole dimensions are nominal.; Full Base Cover—Optional two-piece full base cover is fabricated from ABS plastic. Valmont reserves the right to provide a two-piece steel full base cover on some applications depending upon the finish requirement and/or pole base square.; Anchor Bolts—Anchor bolts conform to ASTM F1554 Grade 55 and are provided with two hex nuts and two flat washers. Bolts have an “L” bend on one end and are galvanized a minimum of 12" on the threaded end.; Hardware—All structural fasteners are galvanized high strength carbon steel. All non-structural fasteners are galvanized or zinc-plated carbon steel or stainless steel.; Finish—Standard finish is Finish Painted (FP). Additional finish options including V-PRO™ 30, V-PRO™ 53 or V-PRO™ 100 are available upon request. See the product ordering code for color options.
Spec Sheets
SPC7363 STEEL INTERNAL HINGED POLES 11189GA.PDF
Fixture Details
Family:
US
Features Benefits:
Height20' to 39'; PoleThe pole shaft conforms to ASTM A595 Grade A or A572 Grade 55 with a constant linear taper of 0.11 in/ft.; Pole TopPole is provided with either a tenon top or drilled for a fixture mounting. A removable pole cap is provided for drilled poles. Consult the luminaire manufacturer for correct tenon size or drill pattern. Other pole top options include pole cap only (PC) or plain top (PL) which is typical when the pole top diameter matches the necessary slip fit dimensions.; HingeThe internal hinge includes a stainless steel pin. A flexible guide is provided for wiring protection through the hinge area.; ShroudThe shroud is fabricated from weldable grade hot rolled commercial quality carbon steel with a minimum yield strength of 45,000 psi. It is a onepiece formed channel which conforms to the pole shaft taper. The shroud is secured by a threaded stud and nut with provisions for a padlock to prevent accidental or unauthorized lowering.; WinchA removable winch is available for raising and lowering the pole.; HandholeA reinforced handhole with grounding provision is provided at 1'-6" from the base end of the pole assembly. Each handhole includes a cover and the cover attachment hardware. Poles with a 5.25" or 6.00" base square are supplied with a 3" X 5" rectangular handhole. All other pole assemblies are provided with a 4" X 6.5" ovalized handhole. Handhole dimensions are nominal.; Full Base CoverOptional two-piece full base cover is fabricated from ABS plastic. Valmont reserves the right to provide a two-piece steel full base cover on some applications depending upon the finish requirement and/or pole base square.; Anchor BoltsAnchor bolts conform to ASTM F1554 Grade 55 and are provided with two hex nuts and two flat washers. Bolts have an L bend on one end and are galvanized a minimum of 12" on the threaded end.; HardwareAll structural fasteners are galvanized high strength carbon steel. All non-structural fasteners are galvanized or zinc-plated carbon steel or stainless steel.; FinishStandard finish is Finish Painted (FP). Additional finish options including V-PRO 30, V-PRO 53 or V-PRO 100 are available upon request. See the product ordering code for color options.
You must log in to add this fixture to a project!
