Up to 6100 lumens output with 4 beam angles variants from narrow to wide; Powerful close-range and long-range projection; Flat-field, high-contrast image projection based on high-power LED engine; 4 layers of versatile dynamic effects (colors, gobo projection, gobo animation, prisms/frost); Crisp image projection; Rugged IP66-rated housing; Minimal maintenance low total cost of ownership; Length: 16.4 in.; Width: 11.6 in.; Height: 17.5 in.; Weight: 38.6 lbs.; Color wheel: 8 interchangeable colors + open; Gobo wheel: 6 rotating gobos plus open, indexing, variable rotation; Gobo animation: Variable speed linear animation effect; Prism: Prism wheel with 2 interchangeable prisms, prism rotation and indexing Frost (wash effect): Motorized variable; Focus: Motorized, variable 3 m (9.8 ft.) to infinity; Shutter: Strobe and pulse effects, instant open and blackout; Dimming: Electronic, constantly variable 0-100 percent, 16-bit control; Control options: DMX, RDM, standalone; DMX channels: 13; Configuration, addressing and status: Onboard control panel with OLED display Control resolution: 8- bit DMX control of each color; DMX compliance: USITT DMX512-A; RDM compliance: ANSI/ESTA E1.20; Light source: 230 W white light LED engine; LED manufacturer: Prolight Opto; CRI (Color Rendering Index): 72; Color temperature, EU models: 6700 K; Color temperature, US models: 7100 K; LED lifetime: 30 000 hours (to >70 percent luminous output)*; Luminous output: Up to 6100 lumens depending on beam angle variant; Cut-off angle; Narrow: 12; Medium: 22; Wide: 36; Very Wide: 50; Housing: Cast aluminum; Finish: Hard anodized, metallic grey lacquered; Front glass: 5 mm (0.2 in.) anti -reflection coated tempered glass; Ingress protection: IP66; Corrosion resistance: C5-M (very high corrosivity / marine, ISO 12944); Impact resistance: IK08 (with control panel display cover plate installed); EPA (Effective Projected Area): 0.15 m2; RoHS compliant; Suitable material: Borosilicate glass, coatings heat-resistant to 450C (842 F) Alternative material: Aluminum 1060, paint on front lens side, 450 C (842 F) HT paint Gobo diameter: 30.0 mm +0/-0.3 mm (1.2 in. +0/ -0.02 in.); Maximum image diameter: 23 mm (0.91 in.); lass gobo thickness, minimum: 1.1 mm 0.1 mm (0.045 0.004 in.); Glass gobo thickness, maximum: 3.0 mm 0.3 mm (0.12in. 0.012 in.); Aluminum gobo thickness: 0.5 mm 0.02 mm (0.020 in. 001 in.); Orientation: Any (sides must be kept vertical); Mounting: Adjustable yoke; Minimum distance to illuminated surfaces: 0.5 m (20 in.); Location: Suitable for wet locations. Do not immerse in water.; Power cable entry: IP68 cable gland; Power connection: 1.8 m (5.9 ft.) cable tail with bare ends; Data cable entry: IP68 cable gland; Data connection: 1.8 m (5.9 ft.) combined input + output cable tail with bare ends; AC power: 100-240/277 V nominal, 50/60 Hz; Power supply: Auto-ranging electronic switch-mode; Typical half-cycle RMS inrush current: 8.4 A; Idle power (zero intensity, no effects applied): 32 W, 0.3 A; Typical Power and Current; 110 V, 60 Hz: 320 W, 2.9 A, PF 0.977; 230 V, 50 Hz: 310 W, 1.4 A, PF 0.971; 277 V, 60 Hz: 305 W, 1.2 A, PF 0.950; Cooling: Convection, internal forced air; Maximum ambient temperature (Ta max.): 45 C (113 F)*; Minimum ambient temperature (Ta min.): -30 C (-22 F)**; Glare Shield, Dauntless IP, aluminum: P/N 91611767; Projection Setup Gobo: P/N 91616068; RDM 5.5 Splitter: P/N 90758150

Hard anodized, metallic grey lacquered

Light source: 230 W white light LED engine; LED manufacturer: Prolight Opto; CRI (Color Rendering Index): 72; Color temperature, EU models: 6700 K; Color temperature, US models: 7100 K; LED lifetime: 30 000 hours (to >70 percent luminous output)*