RTA Pedestal Base Pole 
Height—10' to 20'; Shaft—The shaft shall be spun tapered from all new 6063 alloy aluminum tubing and shall be heat treated to produce a T6 temper. Each shaft shall have a 6" long x 3" O.D. straight section at the top to accommodate single or multiple luminaire configurations as a slipfitter. The shaft shall be polished with fine grain aluminum oxide cloths, resulting in a high quality circumferential satin finish. After finishing, each pole shall be fully wrapped with neutral PH krinkle/kraft paper for protection in shipment.; Pedestal Base—The pedestal base is cast from A356 alloy aluminum and is circumferentially welded to the shaft. After fabrication assembly is heat treated to a T6 temper.; Ground Lug Provision—Each pole shall include a 5/16”-18 tapped provision for ground connector.; Base Handhole—he clear opening and door are a trapezoid configuration. The clear opening on the vertical axis is 7". The opening on the horizontal axis is 6-1/4" at the top and 8" at the bottom.; Anchor Bolts—Each pedestal base shall include: (3) 3/4"-10 x 17" steel fully hot dip galvanized anchor bolts each with (2) nuts and (2) flat washers.; Special Finishes—Natural anodize, duranodic, or painted finishes may be specified as an addition to the satin brushed finish, if required. All aluminum parts and accessories shall receive a finish similar to that specified.
Spec Sheets
SPC7072 RTA 10 20 0521ZNX.PDF
Fixture Details
Family:
US
Features Benefits:
Height10' to 20'; ShaftThe shaft shall be spun tapered from all new 6063 alloy aluminum tubing and shall be heat treated to produce a T6 temper. Each shaft shall have a 6" long x 3" O.D. straight section at the top to accommodate single or multiple luminaire configurations as a slipfitter. The shaft shall be polished with fine grain aluminum oxide cloths, resulting in a high quality circumferential satin finish. After finishing, each pole shall be fully wrapped with neutral PH krinkle/kraft paper for protection in shipment.; Pedestal BaseThe pedestal base is cast from A356 alloy aluminum and is circumferentially welded to the shaft. After fabrication assembly is heat treated to a T6 temper.; Ground Lug ProvisionEach pole shall include a 5/16-18 tapped provision for ground connector.; Base Handholehe clear opening and door are a trapezoid configuration. The clear opening on the vertical axis is 7". The opening on the horizontal axis is 6-1/4" at the top and 8" at the bottom.; Anchor BoltsEach pedestal base shall include: (3) 3/4"-10 x 17" steel fully hot dip galvanized anchor bolts each with (2) nuts and (2) flat washers.; Special FinishesNatural anodize, duranodic, or painted finishes may be specified as an addition to the satin brushed finish, if required. All aluminum parts and accessories shall receive a finish similar to that specified.
You must log in to add this fixture to a project!
